Recent content by ROBZTA

I can confirm that the compass can be mounted on any leg, as long as there is no other electronics near it's fine, I have a phantom v1.1.1 and I moved the compass from the back right leg to the back left leg, and I fly my drone without any problems, as long as the compass is not on an angle and...

I can confirm that the compass can be mounted on any leg, as long as there is no other electronics near it's fine, I have a phantom v1.1.1 and I moved the compass from the back right leg to the back left leg, and I fly my drone without any problems, as long as the compass is not on an angle and...

In early 2014 I became curious to why the GS datalink air end transmitter has 2 diversity antennas while the ground end receiver has only 1. So I opened up the ground end RX to see what was inside. When I got a look at the circuit board I realized that the RX had 2 separate antenna connectors...

NEW iOSD MINI + DATALINK MOUNT grace_arc | eBay

if you want better range on your ground station you can try the HIDDEN SECRET 2 ANTENNAS MOD for DJI GROUND STATION link grace_arc | eBay

this GS mount looks better. DJI Ground Station Bluetooth Datalink Mount 3D printed

You can buy a phantom 2 Can bus cable for ground statation here: grace_arc | eBay dji can bus cable | eBay

You can buy a Phantom 2 CAN BUS CABLE on here: grace_arc | eBay dji can bus cable | eBay

Yes I do believe I'm on to something, thank you for your reply. Your post was very informative, and it inspired me to find the right gps connector.

I dont like the GS datalink being on the inside because if I dont want to use it on a certain day You can't just take it out whenever you want, and its extra weight when your not using it. I mounted mine underneath my phantom 2. the cables bellow will allow you to mount inside or outside your...

Yes, you only have to change the connecter plug on the cable, the 3rd picture is just for reference.

Oh yeah your right thank you for pointing that out, it should be fine now I corrected the link.

Hello to all phantom flyers, I have identified the right connector for the loose GPS plug, I created a phantompilots account just so I could share this info. The name of the connector is - MOLEX 4-Pin 2.54mm single row Female Connector socket with lock I found two places where you can purchase...