Recent content by ricky971

In two words, is not the kind of drone that makes the difference but if you get money working with it or if you're just enjoying. You can fly for hobby a K130 without any paper. You need all the papers listed in the ENAC rules if you fly a Phantom for job.

@Daniele88: Hi Daniele, here in Italy it's a big problem flying a drone. You must have a Pilot Commercial License, a 5.000 Euro insurance, an ENAC authorization and a certification written on an original Egyptian papyrus signed directly by Papa Francesco! Just joking, of course! :) The last ENAC...

Thanks everybody for your messages!

LAST UPDATE with actual configuration: - Phantom 4 (firmware 1.02.0602); - RC (tested firmware 1.6.0 and 1.8.0); - DJI Go 4 (4.0.0 for IOS and Android); - Litchi (1.14.3 for IOS; 3.9.2 for Android); - iPad Air 2 (IOS 10.1.1); - Samasung Galaxy S5 (Android 6.0.1); - Samsung Galaxy S7 Edge...

The good news is that I've tested it and It works also with Galaxy S7 edge. The bad news is that, in my case, with 1.8.0 RC firmware, video downlink is unusable.

Galaxy S5 stills having problem with both, DJI Go and Litchi. Impossible to use it to fly.

I've solved the "Sync failed" problem in a random mode: - in the DJI Go main screen select the archived flight menù (airplane symbol in the top left of the screen); - slide from right to left every single flight and select the star symbol (favourite); - sync everything. I really don't know if...

I haven't any HD double output option inside Litchi, but it perfectly works. Did you solve it?

You're welcome! :)

It should work normally, but try to start the app after that hdmi and usb cable are connected to devices. And, of course, if you have the "double output" option, activate it.

Of course both work, otherwise you wouldn't be able to control all the craft functions.

I don't remember if there is an option about double output, in Litchi for IOS. Maybe it's there but I did nothing, I just putted the hdmi cable inside module and inside Skyzone goggles and it worked. I remember that I had activated double output in DJI Go app. Tomorrow I'll check the Litchi...

I've got HDMI module and Litchi app on iPad and HDMI output perfectly works, even with USB output active.

Do you have also a "deserializer disconnected" message or just "disconnected"? Is the P4 under warranty? If not and if you have the "deserializer disconnected" message, could be the damaged/not perfectly connected ribbon cable between module and radio. You'd have to open the RC and check but, if...

My situation is this: - DJI Go 3.1.0 - P4 firmware 1.02.0602 - RC firmware 1.8.0 IOS (10.1.1) iPad Air 2: everything is perfect now; I've also moved back the device to "Italy" settings (lost "manual" settings in DJI Go HD menù) but I haven't any video or control problem; Litchi stills perfect...