Recent content by rfwilkinson

Ok... If I turned it on (as if it was in the bird), the lights usually stay lit. These are scrolling. It looks just like it does when it is charging and almost at 100%. Right now the red power button is lit, and LED 1 lights up, then 2,3, and 4 in succession then it goes back to 1, then 2,3...

I just pushed the button on one of my batteries twice to double check it's charge (it was not in the Phantom when pressed) and it showed full. When I just walked back in the room, the LED's (the 4 green LED's that show percentage of charge) were coming on in order, just like if it was on the...

In response to how you can take control back after the RTH kicks in, I am pretty sure you need to be in the NAZA mode instead of the Phantom mode (you need to switch this using the assistant prior to flying), might be wrong here though. If you have done this, you can set S1 to GPS, ATTI, or...

You should be able to get an idea of where the home point is by looking at the distance reading. If it says 0 or something small when your bird is on the home spot you think, then I would say you are good.

I have the upgraded controller and I could not move the camera up or down with either the thumbwheel or the app. It just stayed in the upper spot. Try this. It fixed mine (a temporary fix was to change my controller from upgraded to basic in the Assistant software). These guys posted my...

Good to know.. Totally confused before.. I was ready to buy a new IPad... Thanks!

Yes, the ones in the pic came with my Phantom. I just took a sharpie and ran it across the numbers so I could read them.

I tried to download the ground station app to my old IPad and it won't let me. Says I need a new one. Anyone know if the IPad version of Ground Station is any different than my IPhone version (besides a bigger screen)?

Thanks a ton!!! Just ordered a few more 9450's (I will keep the 9443's for extreme backup).

I'm guessing that means that these are 9450's???

One additional question. I have no idea which props came with my PV2+? I just got it about 2 weeks ago and it is the version 3 I think? it has the upgraded controller with the wheel. Did I already have the 9450??

The great evil holly bush at the corner reached out and batted my Phantom Vision 2 plus out of the sky.. In doing so, it broke my prop guards and one of my props. I have an extra set of props so I was back in the air in a few. I went online and purchased more stock props. The model number on...

Looks like I have the chance to upgrade my FC200 Camera software but have read issues with upgrading camera firmware. Anyone know what V1.2.5g version fixes and if my camera is working, should I be upgrading the firmware?

That worked PERFECTLY!!! Thanks a ton!

I have the new upgraded Phantom Vision 2 Plus with the new transmitter that has the camera control wheel in the upper left. It worked great for a bit but all tilt quit working. When you try to push the software button in the IPhone app, the slide bar is stuck at the top and is red. I did read...