Recent content by remvideo

  1. R

    Gains: understanding, flight testing

    I am using phantom Tx, could you explain what you said ? as if you were speaking to a child :)
  2. R

    Show off your CUSTOM, MODIFIED, TRICKED OUT Phantoms

    tiger motors 8x4 carbon props goodluckbuy brushless gimbal super janky landing gear extensions (clothes hangers) got the simensays landing gear, just wanting on carbon fiber tubes to arrive from China.
  3. R

    Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/review

    Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev I guess certain peoples have to have the IMU a certain direction, mine seems to work fine as is
  4. R

    Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/review

    Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev I just plugged it in, didn't change anything
  5. R

    Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/review

    Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev oddly it works reasonably well in this manner https://www.youtube.com/watch?v=hQd0VVu ... ata_player
  6. R

    Gains: understanding, flight testing

    https://www.youtube.com/watch?v=hQd0VVu ... ata_player
  7. R

    Gains: understanding, flight testing

    its very sluggish on lift off also, I actually turned yaw down 10% cause I feel it rotates too fast
  8. R

    Gains: understanding, flight testing

    I've added a good bit of weight to my phantom, and it seems to need more power when taking off, or recovering from my lowering it down, which gain setting(s) should I adjust ?
  9. R

    Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/review

    Re: Goodluckbuy 2-axis Gopro 3 brushless gimbal tutorial/rev odd, I have the same gimbal and didn't have to move my sensor board at all.
  10. R

    four rapid red flashing LED upon start-up, error 29 in naza

    here is my issue http://www.youtube.com/watch?v=CeMm-4gN ... e=youtu.be recently installed a goodluckbuy gimbal, that's the only thing I can possibly attribute this too... it flew perfectly, calibrated etc, then on the third flight starting slowly drifting to the right... and after that...
  11. R

    calibrating phantom transmitter

    please help ! having this problem ! four rapid red LED upon start-up, won't fly. http://www.youtube.com/watch?v=CeMm-4gN ... e=youtu.be
  12. R

    new props and motors installed. front flip take off :/

    My front motor or motors seems to be getting less power than the back one, I have installed carbon fiber propellers (same size) the hubs were a good bit slimmer than the stock hubs are, I also installed the tiger motors direct fit phantom motor upgrades. I checked for the props to be spinning in...
  13. R

    I will pay you to help me program my brushless gimbal

    Thanks guys. Which setting dictates what the gimbals primary position is? Currently It does move or react at ALL
  14. R

    I will pay you to help me program my brushless gimbal

    I have a martinez board and ive downloaded all the software. completely frustrated and losing my mind
  15. R

    What's the purpose of a Gimbal?

    here's a video of my gimbal https://www.youtube.com/watch?v=lRU1iwh ... ata_player