Recent content by Qoncussion

I've been using the cheap Chinese batteries for nearly two years - without a *single* problem. I can't say you'll have the same luck, but they work great for me.

I've been using the following from Banggood since last September, on my P2. They're inexpensive, and they easily last as long in flight as OEMs. I have at least 30 flights on each of them... So far - completely reliable: 5400mAh Battery For DJI Phantom 2 Vision+ with LCD Display 5400mAh...

In addition to the advice given here, lose the prop-guards. Ive experienced VRS twice - both with the guards on. I've never had it with them off.

Balance your props - I promise this will help.

Yep - plenty to choose from. See B&H, Amazon, eBay... etc.

Were you flying with prop-guards on? In even a light breeze, they can cause VRS.

You "technically" don't have a problem (or a valid question) until you mount the camera and test it. It *should* misbehave w/o the camera mounted - so your follow up question above has no meaning, in that any problems you're having w/o the camera mounted are like asking why your car won't start...

banggood.com sells every type of sma adapter/coupler imaginable (as do many other places). Just throw an adapter on the antenna that has the wrong sma type.

Props should not (really, could not) cause uncontrolled ascent. I would recalibrate and do the compass dance at your next flight.

Cover your lens, and spray some contact cleaner into the wifi button port. Push the wifi button a number of times to work the spray into the housing. Let it sit for 15 minutes and see if the problem is resolved.

In assistant software, what value is showing under the Tools menu for the compass "Mod"?

You might try calibrating "X1" in the RC software, then once again in the assistant software. X1 is the camera's vertical control knob on the remote control.

I bought two of those batteries from Banggood back in November. So far, they are excellent!

What don't you like about the P3, Jason? Just curious, as I've considered getting one (but still live my P2)

The 3M tape (the good 30 lb. stuff) works w/o any problems. I, however, use velcro to allow me to move, remove, test and replace parts on my P2 more easily. I've been using this stuff for just under two years, and it's never come off or separated my vtx on its own: Amazon.com: VELCRO -...