Recent content by ody

I have 2 camera / gimbals for a P3A $200 each 1st one: Current firmware Video works fine. Gimbal looks good, but something does not seem perfect. If I have the P3 on a table in front of me, looking at the front (looking into the camera) If I tilt the P3 to the left a lot, the camera holds...

Had a few min late this afternoon to mess with this... As suggested, pulled the back plate, loosened the shaft enough to rotate it so the flat side was level with the camera. Bit of pressure to reseat the shaft. Assembled enough to test, and the thing powered up, did the happy dance, and...

thx for the replies Busy day, Will try to find info on alignment and try to adjust later this evening. I'll report back once tried. Any info / links on orientation of the flat spots appreciated.

When the gimbal separated, I was in the Turks & Caicos islands. So I rush purchased another camera / gimbal and my wife brought it to me the following week. That of course worked fine. The problems are just with trying to resurrect the original gimbal. The original problem was a separated...

P3A gimbal camera bouncing around like crazy on startup. (long post, just trying to be as detailed as possible) Have had this P3 since last May. (10 months) Gimbal / ribbon cable was damaged in transit to the Caribbean last July. (packed well in a checked suitcase) One of the motors...

14 Deg (57F) here in Southwestern Ontario today!

OK, lets see where this goes. I've been using Wondershare Filmora for the past 6 months. (Running on a Windows 2003 server)(and Win XP on a laptop while I travel and do videos) I'm not a "video guy" and this was just easy to get, install, and I'm pretty happy with what I've been getting...

Hum... I never realized there were fuses on that board. I have 1 dead camera just sitting on a desk that I will need to go look at the board again.

Doinkle: I'm also new to this "sport". Purchased my P3A back in June. Spent the whole month of July with it in the Turks & Caicos Islands. Averaged a couple flights/day. and 90% of those were over open water, some from boats. Tons of video that I just love! As others have said, calibrate on a...

I can't seem to get the Remote to update firmware (via USB) Saw comment that anything after 1.3.20 was via IOS Also saw something that said RC update not required, I'm just wondering if others are getting their RC updated. Using an Iphone 6 with App Version 2.2.0 No warnings/comments about...

For someone that has the file already... Post the link to the zip file (for both advanced, and professional) Some browsers still have a cached version of the html page. a direct link may help some.

Is this saying the Phantom 3 Advanced will get 2.7K video with only a firmware upgrade? or should we assume new Advance units will ship with a diff camera capable of 2.7K?

yeh, the other 3 are tight. I did order a couple spare motors on Amazon. 1 spare CW and 1 spare CCW motor on Amazon http://www.amazon.com/gp/product/B00YYA4AW6?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00 Suppose I should replace the one with movement and keep the one with movement as...

This might be a hard question to answer, but... I have a P3A, and I can feel a very slight side to side movement in the motor shaft. Not enough to see. But if I grab the top part of the motor and rock it side to side, I can definitely feel the play in there. Is this something I need to replace...

Added a short video of the P3A sitting on a table, no props Power on... Gimbal level Then power up Then power down. Looks pretty stable to me. I'm hoping this is what you were looking for, and not the video FROM the P3A Sample DJI