Recent content by Nielske

Thanks Mate! But i have seen to many questions about this item, so proberly this will indeed a better help to find a solution fore some disapointed DJI pilots! If you don't reset your flight controller it will result in software conflicts, its not enough just downloading V1.08!

Ahh, Thanks, didn't know that! I searched several times for this item and couldn't find any solution, sorry for this, perhaps this topic may change this search item...

Re: Strange Behaviour? Nobody seems to know the answer... Find out the cause: Latest software 3.08 is responsible for this problem, thanks DJI!... (see topic "Downgrade your Firmware") I dislike the way DJI is constraining the possibilities of your Phantom2 in case You are an experience pilot...

Hi All, Find a way to really downgrade your Phantom2 firmware without conflicts etc. If You are interested and having problems with the limitations DJI (Apple like) constraining you, i find out a solution. For me personaly, the latest software 3.08 is causing serious problems with lift...

Ok, its telling you, slow yellow leds: ready to fly without GPS (check right switch on your controller, set it to upper position!) fast yellow leds: connection lost with remote controller Also possible: The Phantom is in FAILSAFE mode, check your right switch on the remote, set it to upper...

Maybe intresting... I am flying with motorplate extensions (up to 450mm) for a year now and i must say its more stable (during wind less nervous corrections), smoother flying and much less noise. At the other hand is also costs aggility and the shell cant handle the extra force very well so...

After calibrating the compass, what are the lights (leds) telling you? In other words: what is the led status ? (green/yellow/red etc)

Re: Strange Behaviour? Thanks for responding, Yep, both IMU (basic and advanced) and sticks. The IMU/Compass values are all in range... I changed props and gain settings as well Maybe the YAW function causes this problem because its much more sensitive to the stickinput as before?

Hi All, My Phantom2 (loaded with 10*34 props, Motor Extensions, Large Carbon landing Gear, Zenmuse 2D and Gopro) has flown very well over the last year. It was stable, responsive and silent all the time during many flights. But now, suddenly, there is a very strange problem... After a couple...