Recent content by mrx

Robert Farnow - sadly it sounds like we're experiencing the same problem. Buford - thank you for your input, it matches what my gut is telling me. I've never disassembled one of these before. Any guidance on the disassembly to replace the ribbon cable? Again - thanks for your input.

How do you "relink" the remote? What steps are involved?

It sounds like we're experiencing the same problem. I believe I can rule out anything to do with the firmware as both the P3 and RC were last updated in June and everything worked fine up until the last time I used them which was in October. From Oct - Jan it was unused and just sat in a case...

Thanks for the replies; I've tried multiple cables w/o any success. Cables were tested and verified good on other devices so I don't think it's the cable connecting the iPad to the controller. I also tried to upgrade the firmware, put the bin file on the SD card, inserted it into the drone...

DroneCable by mrx posted Jan 29, 2016 at 1:16 AM

Thanks - that certainly seems like the culprit. I did inspect the cables and did notice this - it's the black flat ribbon cable that connects the camera to the gimbal up to the gimbal housing. A small section separated - I attached a photo that will hopefully show you that area. There are no...

I last used my P3 in Oct and it worked fine; I've had it since June 2015 and it's never crashed, been dropped, gotten wet, etc. The other day I wanted to take it out, before doing so I turned all the parts on (RC, Ipod, P3) to ensure everything was working. Everything powered on fine with the...

From the Director -> Create Work menu I see you select "Add Moments" to add videos that you will use to extract clips which in the end will produce a video. Once that is done is there a way to clear out those videos? I see how you can delete clips but not the actual "moment" video you imported.