Recent content by Mr Mufakka

About 5-6 minutes in, my h3-3d unexpectedly panned right and lost tilt control. I landed immediately. The camera was still filming, just none of the gimbal motors were working. I turned off the phantom and powered it back on. Gimbal came on and did its self-test. Responded to remote controls...

P2 with the ImmersionRC 600 tx. I'm trying to use a set of Fatshark antennas. The issue I'm having is, as I screw the antenna onto the tx, I lose connection (the red LED goes out) after the first couple of threads. I have ZERO connection after that. I've tried the following: The stock antennas...

Fairly certain I've got all that set right. As I mentioned, the setup works fine with the stock antennas. I'll turn everything off, switch the antennas, power back up, and then nothing but snow on the monitor. I've tried flipping through the channels as well.

Yes, it's a black pearl dual diversity. And I have been using three antennas. Working: 2 stock antennas on the monitor. 1 stock antenna on the TX. Not working: 1 immersion antenna and 1 stock antenna on the monitor. 1 immersion antenna on the TX. All of the connections are the correct male to...

That's an interesting thought which makes sense logically, however is that the case in the real world? I'm fairly new to this so I'm not sure if there are other factors at play. I've tried the Immersion antenna on both antenna ports on the black pearl. Neither yields a result. And when I switch...

I got the SMA adapter so the male/female ends are correct. How do I determine which direction the circular polarization I need? My TX is also from Immersion. The antennas I have are Right.

Recently bought a set on Immersion antennas. Unfortunately I can't get a connection with them, only snow. Video feed works fine with stock antennas but after I power down and switch, I get nothing on any of the channels. I'm using a black pearl monitor and an immersion TX.

I'm in the process of collecting all of the parts needed for an FPV setup. I have the Mini iOSD and was curious if, in the meantime, I could install it and have the GoPro record it's readouts while in flight until I get my goggles/screen. Is that possible?

Great info here. If you could however answer this for me. If I wanted to use goggles, instead of the screen, what needs to be added/removed from this list? P2 with a GoPro 3+ Black.

I've modified an anti-vibration mount from a P1 to fit my P2. The problem is, the balls are not isolating the vibration and GoPro 3 is shaking (not vibrating so much as actually shaking) and it'll get so bad that it actually affects the craft. My question is, aren't the balls different...

Is anyone using a non Zenmuse H3-2D gimbal? I know there are some out there but the board won't let me search "gimbal". I'm wondering if there is a cheaper, alternative gimbal that will hold me over until I shell out for the Zenmuse. And, are any of these alternative gimbals plug and play like...

I'm having issues trying to remove the fisheye effect with the GoPro Suite software. I know it's a fairly simple process but no many how many times I try, after I convert the video, the fisheye is still there. Anyone have any ideas? I've even tried uninstalling/reinstalling the software.

I just find it odd that DJI offers updating Mac software for the quad but not that transmitter. The software for the quad works great. I do have Windows installed on it as well however very rarely switch over to it. Guess I'll have to for this.

I'm not sure if this is even needed or not but does the stock transmitter receive firmware updates? If so, how do you connect it to the Phantom software? BTW, I have a Mac. The Phantom itself connects and updates flawlessly.

Also, if I may, which model of the TK102? Looks like several different models.