Recent content by MikeBer

Yes, brown and red (red positive) and pitch. Worked like charm. Make sure all the screws are tight when installing gimbal, so there is no vibration in air. I soldered wires, but really you do not have to. Strip, twist and electrical tape (each individual wire of course). I got some of these...

Hi. Mounting a gimbal should not be a problem with the Extreme bracket. Bracket mounts with 4 screws included with the bracket and gimbal mounts centered, self explanatory. Power and tilt is a bit tricky, I used brown and red wires from the colored ribbon that taped to phantoms leg for power...

Found it! There is a magical cable that will solve my wiring problem: http://www.dpcav.com/xcart/Video-Cable- ... Hero3.html

Thank you, I am aware of all internal connections to the point of grey 8 wire cable for the zenmuse. I am assuming that that 8 pin could be spliced to use to power gimbal (as you mentioned, Pins 3 & 4 are ground, pins 5 & 6 are power) and some of these are for video to work properly with iosd...

CityZen Thanks for your help. I got the gimbal working flawlessly, without vibration / gello. If you can, please help me out one more time. I am planning to connect FPV to Phantom 2 (non vision) How do I connect iosd mini to the generic gimbal with camera, since it is not zenmuse? I assume I...

I solved vibration and jello issue for my $55 goodluckbuy ebay gimbal. (I have a Phantom 2 non vision): 1) switched to carbon fiber blades. 2)inserted CVS brand earplugs into the holes of round rubber dampers. 3)Got Xtreme ($10)CNC machined plate for generic gimbals to use on the Phantom 2...

I guess nobody can help me to resole this vibration issue....

Thanks everyone! Got the gimbal powered through the colored wires (brown/red), later will switch to F2 port for power and tilt. 4 holes on the mount matched so did not have to drill anything. But I did ran into an issue of crazy vibration. Gimbal is very steady when I try it without props...

Hi Everyone. I want to use an inexpensive (goodluckbuy) gimbal on my Phantom 2 (non vision) Can I get power from the set of cables in the attachment photo (Red and Brown I assume)? Or there are other cables I need to utilize for power? P.S. I am aware of tilt control to the Naza(F2), just need...

CityZen, kind soul(I mean it) thank you for the reply! I can not search this forum. When I enter: gimbal in search line, it gives me error. It needs more words...like gimbal alternative, or something. I am sure it was answered before, but I can not narrow down the search and manually searching...

Hi. I have same question, but it seems to me that users of this forum for some strange reason ignoring questions about these cheap gimbals to be used for Phantom 2 Have you had any luck? Please let me know. Thanks, Mike.

Hi Everyone. I have a Phantom 2 (non vision) Can somebody suggest an inexpensive (+/-$100) gimbal that would work out of the box, meaning that mounting plate would fit and would use P2 power with no soldering? I looked at tons of pages, mostly on first generation Phantoms or others, but can not...