Recent content by Maximiliaan

Ok, I tried everything but nothing works. Got the red light from the transmitter working, so that means the power cables are working. Connected the yellow cable to the yellow cable, should be right, and still no image. I do notice a signal. Whenever I twist the antenna a bit I do see movement in...

There are two black and red wires.. The ones that are grouped together with the yellow cable, or the ones that are stand-alone?

So, I unconnected all the cables, so I can start anew. Can someone help me by saying what cable I need to connect to what cable? Because I must have been doing something wrong before.. The grey cables coming from the gymbal, the drone and the circuit board are untouched, but they might be...

Hi Noiseboy, I'm using this Receiver/Monitor: http://www.hobbyking.com/hobbyking/stor ... aff=164733 There is no real manual, so no idea what channel I should be on.. Mx

Okay, update. So I managed to see a greyish very distorted image on the screen that is coming from the camera. So there is a connection. But no matter what frequency I set both the monitor and the transmitter on, I never get a fully useable image. There is clearly something wrong with those...

Hi All, I have a DJI Phantom 2, the new H3-3D gimbal and a Boscam TS 353 Transmitter. I installed everything as it should be, but I can't get a working picture on my monitor. Just static. Gimbal works though. Cables should be good, just to be sure I'll summarize every cable connected on the...