Recent content by markloane

I'm also trying to work out how to do this, I can only get the phantom to move to a waypoint and then turn to face the target, "Stop & Turn", anyone done better?

I also did the same thing today, 10 - waypoint loop in the field in front of the house, everything worked very nicely! Like you I'm trying to work out how to keep the camera pointing into the centre of the circle, if you work it out before me please post. At the moment it's looking very manual...

Did not like it at all so designed this http://www.thingiverse.com/thing:247161

Here is a 3D printed clip on screen mount for the Phantom controller, use's a GoPro type Connector to make it adjustable and can be used for other things. Posted on http://www.thingiverse.com/thing:247161

Here is a 3D printed clip on screen mount for the Phantom controller, use's a GoPro type Connector to make it adjustable and can be used for other things. All the design files are here, if you want to modify. http://sdrv.ms/1bTNGES http://i.imgur.com/lTGZX2b.jpg...

Looks like I get about 15 -17 min of flight time, but I now have some stability concerns, in hard descent I almost lost it, very bad wobble. Also getting interference on the 5.8G signal, I'm trying to work out why. Love the black pearl monitor and getting good stable video from the GoPro unlike...

Just finished building my Phantom 2, Vision replacement. Added: Immersion Rc 600mw 5.8Ghz Video Transmitter Black Pearl HDMI 5.8Ghz 32 Channel Diversity 7" Monitor + FatShark (Designed and 3D printed a custom mount to fit DJI controller) DJI IOSD Mini DJI iOS Ground Station inc 2.4Ghz Data...

Stock landing gear is 42grams Low Skid landing gear re-printed with less material is 28grams Now working on Long version so a Gopro and Gimble can be used.

Stock 42g Low Legs 36g plenty of scope to remove more weight...

Update: I moved the compass around about 40 degrees on the leg2 mount, to it exactly matched the original alignment. Now in GPS mode the phantom is completely steady even in the strong wind this morning..

I give more detail on the build here http://www.thingiverse.com/thing:169936 There is a leg design for the compass in the build, see picture. The design is for a phantom without camera, I have a Zenmuse H3 2D GoPro Brushless Gimble on another Phantom. Test flight & landings here...

I have designed and 3D printed, a new set of landing gear for my DJI Phantom. It’s skid Landing gear for easy landing and speed. Scanned in the default legs and remodelled in the excellent SpaceClaim 2012+. Printed on a UP! Plus 3D printer. Files available free @...