Recent content by LTH

  1. L

    Remote Won't Power Up?

    I have the same problem with my P3 4K. It started about 2 months ago. I finally figured out if I pushed on the upper left corner of the button it would power up. Also have to push same place to power down. I've come to the conclusion it has to be a problem with the button on mine anyway. I'm...
  2. L

    Update Firmware

    That's what's so odd about this. When I get out in the field where there's no wifi I get the warning saying I need to upgrade the firmware but when I get home and connect to the Phantom and have wifi I don't get the warning. Very odd I must say.
  3. L

    Update Firmware

    I need step by step instructions on how to update the firmware on the PSP 3 4K & it's remote controller. I can't find anything online that doesn't sound like a foreign language. I thought I was smarter than this but I guess I must be mistaken. LOL
  4. L

    Remote problem

    I went out to fly a while today and ran into a problem I hope some of you can help me with. Wednesday I flew a while & when I finished up I had a problem turning the remote off but I kept fooling around with the button & I finally got it turned off. I brought it home & charged it & went out...
  5. L

    Question About Flying over water

    Thx msinger for the quick response. I'll be sure to keep it over 10 feet above the metal roofs. Thx again.
  6. L

    Question About Flying over water

    I have a friend that has a large marina that wants me to do some video for him. I've read everything about flying over water and have made a few flights around the edge of the lake so I'm not to concerned about that. What my real concern is that the entire marina is covered with metal roofing...
  7. L

    Can't create video

    Today's the first day I've had a chance to create a movie clip with the DJI App and it won't let me on my Samsung Tab A. It gets to the point where it's creating the movie and gets about 75% done and just goes back to the start of creating it. It seems to work fine on my IPad except I don't have...
  8. L

    Phantom 3 4K Gimbal Problem

    Thx. It was a pretty easy job for being the first time tearing into it. LOL The biggest problem I had were these 67 year old eyeballs. :rage:
  9. L

    Phantom 3 4K Gimbal Problem

    I'm just to inpatient to wait that long. I figured it was easier to spend the $20 for the new Yaw arm and fix it myself. It took about 45 minutes versus who knows how long to get it back in perfect shape.
  10. L

    Phantom 3 4K Gimbal Problem

    I do use the gimbal protector but I had a harder than normal landing a couple of days before noticing the problem. I'm pretty sure that's what caused my problem. I replaced it yesterday with one of the CNC replacements from Bock and it's back as good as new now.
  11. L

    Phantom 3 4K Gimbal Problem

    I just got through taking it apart and straightened as best I could. It looks a whole lot better but not perfect. I'm gonna have to order a new one. After doing a lot of research after my last post seems like this must be a weak part anyway. Lots of CNC versions are available. Thanks for taking...
  12. L

    Phantom 3 4K Gimbal Problem

    Here are 4 pics that might help out. First pic is of the camera that's suppose to be aimed straight ahead. Second is against right stop. Third against left stop. After further investigation I found what looks like might be bent. Could someone take a look at the bracket in this pic and...
  13. L

    Phantom 3 4K Gimbal Problem

    I'm having a problem with my camera not facing forward. I've already done an imu calibration, gimbal calibration, and checked that the setscrew that holds the gimbal onto the shaft is in line with the flat on the motor shaft and the setscrew is tight. When the Phantom is sitting flat on a table...
  14. L

    Antenna Help

    OK thx for the help. Maybe someone will come along that knows exactly whee they go before my parts get here Monday.
  15. L

    Antenna Help

    I'm not sure if you caught it in the original post, but I did take pics all through the process but can't make out the routeing. The first pic is from the tear down last night & the second is after everything is removed but the landing-gears/wires from antennas. I'm pretty sure the 2 marked with...