Recent content by kustomizer

  1. K

    Won't connect to GPS

    Thanks, I moved to the other side of the building and it locked in just fine.
  2. K

    Won't connect to GPS

    I will do that to see what is going on here. I did take it to the other side of the building and it did connect, so I think I'm good now, but the GPS app is a good idea anyway, thanks.
  3. K

    What App to use

    Looking for a ground station app for the DJI Phantom 2, everything I seem to find is for the Phantom 2 Vision +. Can I use those for the Phantom 2? I want to use google maps to setup waypoint automated flying. Let me know your thoughts on this.
  4. K

    Won't connect to GPS

    Not sure what I need to check. I re-calibrated the compass. Can being close to a 3 story building cause this? What else can be wrong?
  5. K

    Need the GPS Switch

    Thanks, ordered one and it's on it's way!
  6. K

    Need the GPS Switch

    Not sure how or when it broke, but I need to replace the GPS switch in the upper right corner of the DJI Phantom 2 controller. Anyone know where I can get one?
  7. K

    Pantom 2 won't turn on after FPV install

    Ok, this is really dumb, but I figured out what was wrong, I wasn't allowing the battery to start correctly, doh, man, don't use something for a few months and you forget everything! I have always had the hardest time getting used to the battery power-up, well, the Phantom now powers up! Now...
  8. K

    Pantom 2 won't turn on after FPV install

    Ok, I'll check that tomorrow when I get to work.
  9. K

    Pantom 2 won't turn on after FPV install

    Yes, the iOSD mini is plugged into the can bus on the leg.
  10. K

    Pantom 2 won't turn on after FPV install

    No, I soldered in the the iOSD and transmitter to the red/brown/yellow/brown cable. Nothing smoked when I tried powering it up as I had the top open. I put a volt meter on the main power connections on the main board and tried powering it and there is no voltage there. Nothing but the the...
  11. K

    Pantom 2 won't turn on after FPV install

    I did the installed based on a couple YouTube videos. I just undid the iOSD and it still won't power up.
  12. K

    Pantom 2 won't turn on after FPV install

    I just installed the iOSD mini and a AVL58 transmitter and now my Phantom 2 won't power up? Any idea why? Batteries are good.
  13. K

    Ok, feedback on one more setup

    Not yet, just doing research and putting together the purchase order.
  14. K

    Ok, feedback on one more setup

    Ok, in an attempt to put together a package that can be purchased by one vendor I would like your feedback on this setup. I recommended the setup that was recommended in the post about what is the best FPV setup to buy, but because I work for a school district and everything has to be setup for...
  15. K

    Storm All-In-One FPV

    Thanks!