Recent content by Jorge

Hello guys, I have a Phantom 2 (just it, not the visions version) with a gimbal h3-3d and a gopro black hero 3+ I would like to know if this FPV setting will not interfere with the phantom 2 frequency: Fat Shark Teleporter V3: Transmitter 5.8Ghz 250mW Headset TeleporterV3 FPV QVGA 1/2.5 "...

Thank you TeamYankee I was thinking that were some kind of problem. As long as I fly in the limits I'm ok with that lights then!! Thank you!

Hi Jason, Look at the 9-10 seconds of the video when the drone is near to the wall you will see the lights blinking red rapidly then turn back to green slow blinking.

Yes, in fact I'm. I'm at start of the yellow circle of the No Fly Zone, here I can only get it up about 30ft. Is that the cause of the red blinking lights? Telling me that I'm near an airport?

So the compass calibration completes when the yellow lights blinks at the end of the procedure? I Thought that it should blink green not yellow. For this I'm good, I always do this procedure and it is all ok. By the way I did all that procedures (calibrate the RC and also the P2 and did the...

I have the first Phantom 2 version (not the V or V+ that you can connect your device). No app with it.

I completely agree that such no fly zone is totally wrong and mostly potentially dangerous. Take my example for instance, I live in Fortaleza, Ceará, Brazil and here the fc**** airport is right in the middle of the city, so you almost can't have fun with your drone in almost everywhere on this...

Hi guys, totally new to the Phantom world. I would like to know why my P2 keep blinking red lights during all flight time. I calibrate the compass, I have last firmware updates on P2, RC and Gimbal (Zenmuse). Right after I take off I have the front ligth light red (I think it is normal) and the...