Recent content by Jonathan M Halley

I recently crashed my Phantom 3 Professional. The camera and gimbal is not functional. Does anyone know where I can order another camera and gimbal assembly and put it in myself? The pins are all working fine, it's just the gimbal and camera that are destroyed. Thoughts?

Yeah I was messing with it until the early morning hours. I got the pins back in and everything. It did the gyro when powering up... However something is definitely off track. There are grinding sounds and constant adjustment of the camera... I also noted there is not feed to my iPhone. "No...

Well said and lesson learned.... the hard way...

Can I remove the camera and it still connect and fly? Solution: simply replace the camera?

Nope it just pulled the pins, smashed the camera glass and dented it. Its dangling by 1 connector

This shows exactly what your screen is showing.

Building was probably 300ft and yeah pretty much total loss.... Camera and gimbal are attached by 1 of the shock absorbers but all the wires are disconnected...

Where do I find this setting?

So if I didn't have an RTH set, it should go to 20M above the take off point right? It went to 30M though...

So looks like I was at 27M when I lost signal and I didn't have a max set if that's what you are referring to...

Here we go... I recently crashed my Phantom 3 Professional due to an RC Signal issue... Here are the specs: I had taken off and was flying around a downtown area. I went to the other side of a tall building (which I had done previously without any issues) and suddenly got the RC Signal lost and...

Do I do that within the flight app? That's how I've been reformatting for every flight.

I've run into an issue where I can only record 4GB of footage on the 16GB card (the one that came with the copter). At a certain point in the flight, my phone won't let me press the record button or change the mode to take pictures. Any ideas why this is happening? I have the Phantom 3...

Thanks for the posts guys. I talked with DJI support, they were actually pretty helpful... Surprising considering their reputation. They suggested I give it one more go at the install then contact the LA office. So, I tried it once more and it worked!!! I can't believe it! Thanks for the help...

Ok. I ran out and got another card and have started the update. I noticed that the green and red flashing started (on the gimbal) Then I am now getting a solid red light...