Recent content by jfmm

  1. J

    Ch7 Gimbal control with stock camera

    After chose "H3-2D" mode on phantom 2 tool, you need to hit return key to write the new setting!!
  2. J

    Ch7 Gimbal control with stock camera

    You will need to change the advanced settings of the gimbal because the tilt axis is probably limited at -450. Run the "phantom 2 tool" and chose "Vision" mode. Run the Assistant Software and insert the travel limits with 1000 and -1000 on the gimbal settings (center with 0). Run the "phantom 2...
  3. J

    Camera Mods

    I already took a look on the API from Sony. To use it we need a device running android + FPV system + control link to the transmitter and a lot of burned brain cells. It's a lot of weight for my fat phantom... I did some tests this weekend with a tarot T-2D and QX10. The limit distance is about...
  4. J

    Ch7 Gimbal control with stock camera

    I have a Phantom 2 with a tarot T-2D and all was working fine untill the last firmware installation. On the phantom 2 tool switched to vision mode to have access to the gimbal settings on Phantom 2 Assistant_3.0, then I switched again do H3-2D mode on the phantom 2 tool and everything works...
  5. J

    Camera Mods

    Bad news... "Thank you for contacting Sony Support. I understand that you wish to know if a Wi-Fi repeater can be used to the camera to increase Wi-Fi distance. There are several environmental factors that can reduce the maximum range between a Sony Wi-Fi compatible camera and a smartphone...