Recent content by Jetfixer

  1. Jetfixer

    lightbridge firmware PROBLEM (and solution) - firmware version not found by dji assistant tool

    After numerous attempts, and never getting, "BOOT ME", I figured out that in my case I had to deviate from the instructions a bit. The ONLY way I got into the boot loop to be able to proceed, was to have the 3.3 jumper in place, the wifi board connected to the serial-usb adapter, and THEN plug...
  2. Jetfixer

    Is it the Heat?, or being left for a period of time?

    WOOHOO, Success! Hope it lasts!
  3. Jetfixer

    Is it the Heat?, or being left for a period of time?

    I think I've figured it out. Contrary to the instructions, the only way I've been able to get mine to say "Boot Me" was to have the 3.3 jumper soldered in place, the wifi board connected to the FT232 board, then plug it into the computer usb port, start Terra Term, pick the COM port and speed...
  4. Jetfixer

    Is it the Heat?, or being left for a period of time?

    I too have the same problem. However, I cannot get my board to say, "BOOT ME" no matter how many times I've tried. I've even tried from a Win98 virtual machine, since I read that some people have issues with Windows 10. Checked and re-checked all solder connections. If I close out Terra Term...
  5. Jetfixer

    What to do with a Phantom with a broken camera...

    Thought you guys might enjoy this: http://hackaday.com/2015/05/10/roswell-eat-your-heart-out/
  6. Jetfixer

    Anybody found my satellites?

    On page 12 it is...
  7. Jetfixer

    Faa uav commercial requirements

    It should be specific to the requirements of the proposed Part 107 regulations. For instance, I have an Airman Certificate with an Airframe and a Powerplant endorsement. In order to be licensed as a Aircraft Mechanic, there are 3 tests, written, oral and practical for each endorsement, plus the...
  8. Jetfixer

    Need some ATTI insight

    The short answer is yes, you can take off without GPS lock. Just don't forget that RTH can be initiated by any loss of the controller signal or your low battery setting even in ATTI.
  9. Jetfixer

    Unofficial DJI Vision App for Epson Moverio BT-200

    I have read that Google wouldn't support Epson over the Moverio's because they were direct competition to Google Glass which has now been shelved. When I read about Google giving up on Glass, I thought that maybe Epson would get support. I desperately need Epson to Update to a later version of...
  10. Jetfixer

    Unofficial DJI Vision App for Epson Moverio BT-200

    Right here: https://www.prelaunch.com/brands/epson/ ... rio-bt-200
  11. Jetfixer

    Unofficial DJI Vision App for Epson Moverio BT-200

    Good work, Thanks! Also, for anyone who has been thinking of using the Moverio's, Epson just dropped the price by $200.
  12. Jetfixer

    Unable to upgrade camera firmware

    I would try using an sd card formatted in the camera and try again. You may also want to re-download the file in case it got corrupted. Sounds like you are trying to do it right.
  13. Jetfixer

    Aircraft Scheduled Maintenance

    If you're going to go inside to do what you say, then take the time to remove, clean and reconnect all wiring connectors. Not only are they subject to vibration, but also, dissimilar metals corrosion that can cause poor electrical contact. After any prop strike, I dress out any sharp edges or...
  14. Jetfixer

    Anyone in Charlotte?

    I'm in the Lake Wylie area and am looking for a potential partner for my aerial photography business. Either a full-on business partner or just someone that can assist with the flying/videoing/editing, etc. If anyone here is interested, PM me. Thanks!
  15. Jetfixer

    FPV goggles with Vision Plus

    I have not used anything but my Epson Moverios since I got them. Not only do they work very well, they will now also be in compliance with the pending FAA Part 107 rules for line of sight. To fly without them now is the exact same thing as looking down from your windshield as you drive to see...