Recent content by hawkeye_imagery

Thanks Technical Bob - I had a look but couldn't find anything about this firmware upgrade via this website or others. I couldn't find anything on the forum about downgrading and DJI Assistant 2 doesn't recognise that there is a firmware to downgrade to, so I'm a little bit lost for information...

Help needed! I've had my phantom 4 pro for about 4mths and update it whenever there is a new firmware out. However, since the 2nd last update I've had a whirring noise with the camera tilted to the left ever so slightly. DJI Assistant 2 has no record of the previous firmware and so I can't...

I've been flying for a few years and never had this problem before. DETAILS: We attempted to survey an area just outside a rural town for a client and after an hour still had issues with the connection. All the usual steps were followed, latest firmware installed and both UAV's calibrated on...

Thanks SteveAikens. All the firmware updates have been looked at and it doesn't look to be the issue. Apparently it is a gimbal firmware gliche that only DJI can fix. My bird is out of warranty so I can't return it to them for repairs. See my response to Ontario above as to what the specialists...

Thank you again. All the connections look fine. I swapped the gimbal on my other PH3 for this one and it works ok. I've been to two repairman since I posted this and both are telling me that I require a new gimbal as it is a firmware gliche in the gimbal that only DJI repair. Even certified DJI...

Thanks Air Ontario.. All the basic connections that I can get to look fine. I will take the gimbal off and reconnect though all the connections as a process of elimination. Yes, this all happens when the RC is on and/or off. Thanks again

I've had a small accident with one of my phantom 3's whereby I clipped a branch from 2m above ground, it fell onto the grass and the camera came off. I then refitted it back on, thought it was ok and now it's doing this (refer to vid) whereby it will operate ok for 10 seconds and then it will...