Recent content by HarveyMS

Thanks again for your time and the information. Always nice to learn new, helpful things. . .

Wow, thanks for the resopnse and info. Well, about the yaw arm and camera off center. The set screw is supposed to tighten on the flat side of the yaw motor. Even when I changed the motor, with a known good one that was pointing the camera straight in another gimbal, it pointed to the left...

Has anyone ever tried, of came up with a way to communicate with the gimbal via the micro USB port (Phantom 3)? I plugged mine into my computer without an SD card in the gimbal. The camera went limp, pretty much. I say, pretty much, because the pitch motor very slowly, and in small...

Has anyone ever tried, of came up with a way to communicate with the gimbal via the micro USB port (Phantom 3)? I plugged mine into my computer without an SD card in the gimbal. The camera went limp, pretty much. I say, pretty much, because the pitch motor very slowly, and in small...

I did this. No difference.

This is a little off topic, as far as black screen. Has anyone ever tried, of came up with a way to communicate with the gimbal via the micro USB port (Phantom 3)? I plugged mine into my computer without an SD card in the gimbal. The camera went limp, pretty much. I say, pretty much...

Well, glad you're getting your money. So, that wasn't yours posted on eBay?

So, were you now selling it on eBay? The one that someone supposedly just bought (odd, they bid $45 on it, retracted the bid and may have did the buy it now for $45 . . sort of weird and not sure what occurred.)

Yes, reading back I see where he notices his was not an a but a d. There is one on eBay right now. See EeBay Item NO. 233214550751 Five days left. Currently no bids but has a buy it now for $45 plus $5 shipping. Seller apparently clicked on eBays prefilled form so it has wrong...

See EeBay Item NO. 233214550751 Five days left. Currently no bids but has a buy it now for $45 plus $5 shipping. Seller apparently clicked on eBays prefilled form so it has wrong information in listing. See picture of back of controller and it shows it is a d.

I just searched for GL358wA on ebay and found about 10 of them.

Just for anyone else that may read this. Pretty sure that cap is not supposed to come off. Just like the one on the pitch motor (closest to camera) it is suposed to be permanent. It is glues into the roll arm. When installing, looking down long side of roll arm to your right, flat side of...

I wish someone could / would answer your original question. I and so, so many have the problem. No answer that I've found. Glad you fixed it.

Got it guys, thanks. When I unzipped the archived firmware file I downloaded and then transferred the bin file to the SD, it created a whole new file that it put the bin in with others. So, drone wasn't reading the bin file. I have a 0800 and 1500 device not detected. I figured it about...

Yes. It has created those file folders but there is nothing in them. . . I did it twice but will try again later with the earlier version, again.