Recent content by hammer737

  1. hammer737

    phantom 3 advanced gimbal problem

    anyone have any ideas or similar thing happen to them?...drone did not have a crash. Sent from my iPhone using PhantomPilots
  2. hammer737

    Camera/lens optimization service??

    hi sir...I've broke the locktite on my p3a advanced lens and turned it slightly ccw and have found considerably sharper images across the frame...but have yet to resurcure the lens to mount that gets screwed to sensor board. my images were soft on the edges and somewhat better in the center. I...
  3. hammer737

    securing lens to mount after refocusing -p3a

    hi...I've had to refocus the lens after picking up another p3a...had to turns oem lens so factory glue is no longer holding....does anyone have a suggestion of what type of glue I can use to re- secure lens to lens mount. I'm going to put thread tape on lens threads for added secureness...
  4. hammer737

    Focus issue?

    hi Rich UK... I have found that on my P3A is soft focus at centre and sharper left and right of centre....I thought of a lens sensor alignment is out of adjustment..but I've been reading now about a issue with the p3a about if using at 0 degrees Celsius or lower that it may be blurry centre of...
  5. hammer737

    control sticks on controller(p3a)

    fixed....as suspected.....inside remote the white plastic mounts where the entire control stick assembly are attached to inside of remote body were cracked so the stick assembly had moved off the mount and slopped around inside remote. taped down to original placement and used a small amount...
  6. hammer737

    control sticks on controller(p3a)

    hello....today the right stick assembly in the controller has become loose, as such that when pushing the stick in all directions actually moves the stick but now the entire directional guides housing (black coloured) around the stick moves down(1/8th inch) and is slightly sloppy once this...
  7. hammer737

    Old Motors vs. New Ones

    the "new" motors are the ones that come on p3 standard....
  8. hammer737

    Old Motors vs. New Ones

    aren't the "new motors" the ones that are on the p3 standard?... they sure look like them.
  9. hammer737

    10 flights = stress cracks...

    you bet.... thanks!
  10. hammer737

    Latest IOS and DJO Go software.

    no problems here either... running 2.4.0 app, 1.4.0010 on p3a, 1.4.0030 on remote....... but still using ios 8.2 on iPad Air 2 with gps. reluctant to update because of another app needs 8.2.
  11. hammer737

    10 flights = stress cracks...

    I've got the plast-aid, not applied yet, do not have any cracks.... yet, ... before I do apply it wondering about the UAV bits strong arms compared to the summit link prop guards... see the attachment piece for the prop guards is one piece, the same as the UAV bits... UAV bits claim by...
  12. hammer737

    10 flights = stress cracks...

    thank you Martin!
  13. hammer737

    10 flights = stress cracks...

    I've check my p3a, bought early Oct in Canada... has old motors and shell. I've only got a few flights with it, but no cracks... yet!.. Martin Smith how have you put on the plast-aid? just around outside the screw holes inside of shell? great info, thank you!