Recent content by Gydo194

  1. G

    Controller Binding

    I highly disreccomend using this to stop the motors, because of danger of tip over. Hold throttle down for 3 seconds when landed will stop the motors. Google "Phantom CSC" or so and you will Find Some images on the stick position. NEVER do the CSC when flying, it Will cut the motors and the...
  2. G

    Controller Binding

    The CSC means pulling the sticks on the transmitter DOWN and TOGETHER. This is required to start the motors.
  3. G

    Covering 1Km in ATT mode full speed vs same distance flying slowly

    Often my battery is empty very quickly when i fly full speed ATTI, while flying slow and hovering lasts much longer... However I don't know About long distance flying...
  4. G

    Controller Binding

    Are you using CSC to start the motors? That would be the easiest to fix :)
  5. G

    How cold

    DJI states on the website the Phantom 1's operating temperature range is -10 to 50 degrees Celsius, That's 14F to 122F.
  6. G

    camera stabilizer for phantom 1

    I have the Tarot T-2D, it was on my Phantom when i bought it... It has a Xiaomi Yi camera on it, with rubberbands... Still have to come up with something for that. I have the Eachine FPV200 combi for FPV.
  7. G

    When Should I Fly?

    The red flash indicated the number of GPS sattelites, i think one red flash means 5 sattelites, I would reccomend waiting until the red disappears and it's all green. Anyways that's what i do.
  8. G

    When Should I Fly?

    Oh, and when the led flashes red all the time in the air, thar means the battery is low. Bring it close and land.
  9. G

    When Should I Fly?

    I'm quite new too, but the led should be green all the time. It should have quickly flashed green (10 quick flashes) twice. This means it has GPS lock.