Recent content by GregPorter

  1. G

    H3-2D angle problem

    I fixed it and thought I'd pass it along in case others have a similar problem. To get rid of the green light on the TX, I calibrated the TX as per these instructions (A5): Which were located here: ‎download.dji-innovations.com/downloads/phantom/en/PHANTOM_Advanced_Manual_en.pdf That got my...
  2. G

    H3-2D angle problem

    I did the above as posted by deluge2 and got good and bad… it fixed the gimbal actuator lever on the TX, but the green light on the TX that came on when it was linked via to the PC via the micro-usb cable during the TX firmware update… never changed back to red. So now when you power up the...
  3. G

    Upgrade Phantom 1 TX/RX to Phantom 2?

    Thanks, Have ordered the DJ6 and the V1.1.1.
  4. G

    Upgrade Phantom 1 TX/RX to Phantom 2?

    Hi, new to the forum and to Phantoms. I messed up my SR6 controller antenna attempting to upgrade it, and now I need to replace the controller. (My controller's antenna isn't plugged into the circuit board as on later models, so I attempted to splice in to the existing coax and that cut my range...
  5. G

    CNN

    We are seeing similar reports in Arizona.
See more