Recent content by Greg Tokarski

got one flight in, every so often i can make it work, usually on one of 2 batteries, i got total of 5... now, i did boot the drone with each battery to see if the battery upgrades (they all should be up to date as i was flying my pro on all of them).. so this is becoming more and more...

ok, in my case there is no light on the gimbal at all, although gimbal itself works just fine.... When the drone "wants to" work, then the lights on the gimbal work properly.... Still, it does work ok right after i do something weird - like reset the rc, or power the drone with the pairing...

no dice, 1.9.2 worked 2 times, then stopped... What is weird, when i power on the drone, even with radio off, the led on the camera NEVER even blinks.. however sometimes when it goes green, everything is ok... I reseated all the cabling,m and find it hard to believe it's not a firmware issue -...

Exactly, so there's probably some url or archive for those, but i cannot find it.... my app is aware of the 1.80.. I just did a full reset on the RC (c1/c2/rec/ISO/Power) and it kicked me down to 1.9.2 RC ver. and so far ok, i need to do more testing....

my drone already is on 1.11.20, so i do not think i can go that low on the full firmware.. i am just trying to fall back to 1.8.0 on the RC.... the links i see here are to the drone firmware images... I know it worked on 1.11.20 drone and 1.80 on rc, but broke when i upgraded only the RC to...

Hi all. So rc upgrade to 1.9.3 broke my video feed. When I use the standard procedure to downgrade, i can only get to 1.6.0, 1.8.0 fails. If i could get an image for 1.8.0 (or another between this and 1.9.3) and try it from usb connection, maybe my video will come back. Ideas? GT

So, My p3P had a prop fly off.. DJI fixed it under warranty - but since I got it, I get compass stuck, magnetic field interference a lot. What is weird is that it does not always log in the app, when I look at warnings or log after the flight - yet, I get the big red bar at the top of the app...

Exiting the garage without taking advantage of the snow, and a stick shift, would be wrong! I still have to add sound.. I think a voice over of me doing "wro...

When u r comfortable with the drone, definitely fly it without the screen and in atti mode sometimes - good excercise on how to fly in an emergency - video link gone, gps not stable... but that is an ADVANCED type of flying.. so be cautious... RTH on the radio will still work, provided you got...

Also, are you certain the radio is linked to the aircraft? Maybe that's the issue.. Is the LED on the radio green of red?

Put the sd crad in your pc, perhaps a firmware file is on it? Just another thing to check. U can remove pretty much everything from SD, then reformat it in the drone. Another test, no sd card in the camera, and start it up then. If it still beep u got something else going on.

Yes, I know the other pilot, and I know where he lives! I am quite impressed with his skills and the agility of his Blade Chroma aircraft! Not comparing to DJI, as each platform has different characteristics.. but he does make his baby look mean! :) I am flying P3Adv.