Recent content by gfagien

Josh I think the easiest thing to do would be to look at a few photography videos online as it will easy explain basic lighting and situations for taking pictures and will help you

Mine sounds like a loud fan, but I thought since the camera processors were moved inside the bird it made it louder, fans are still loud with gimbal off Sent from my iPhone using PhantomPilots

The issues you are mentioning are the same issues we GH4 users have, we have softer images using 60p over 30p and it is due to the nitrate not being enough data to give as sharp images Sent from my iPhone using PhantomPilots

It's not that it's not true 4k but that you only have 100 megabits of data to play with. If you film 4k 30 or 4k 60 you only have 100 so when you film in 4k 30 you have more information per frame, when you film in 4k 60 you have to stretch that 100 megabits to 60 frames from 30 Sent from my...

ok figured out whats wrong wondering if there is a fix, axis gimbal to the left of the gopro (tilt)is acting wierd, back axis gimbal is working perfectly, every few minutes for like 10 seconds then stops working properly again

gimbal calibrates then get blue light and motors act weird. bad board, bad motors… solvable by usb? any help much appreciated

Hey all 3 out of 4 of my self propellers won't come off my phantom fc-40 i tried to use little force but i am afraid of damaging the motors… any advice?

They tried but updating the motors wouldn't work, which again lead them to believe the board was corrupt especially reading 16 volts to the motors

i took power from the areas between the phantom motors and the board… tired all 4 areas… didn't want to try to take it from the battery. The power to the motors said 16 amps which is obviously way to much so I'm hoping its a bad board.. i ordered a new one, worst case the seller will exchange...

Hey all i installed a tarot gimbal on my fc40 and it powers up but it seems that the motors are not getting any power, on the gimbal it is showing a solid green and blinking blue light, my friend thinks it is a bad board and its not regulating power to the motors… so i bought a new board today...

It is set for 3s, it shows the voltage at 10.8 and last night it was literally going lower by the minute. can it be something inside the phantom?

it says vol-low[4] voltage low but when i stick the battery in the charger after a minute it says the battery is full

i have 3 dji phantom batteries, all show fully charged. when I plug one in it shows the warning light then after a minute wont let me acend. the other 2 show low battery lights right away once I take off and after a minute it force lands. any suggestions on how to fix would be greatly appreciated

I just came home from a trip and something hit my phantom controller in the car, and now the left tab on the RX controller is very loose. It can go in the off position but there is no resistance when moving it to CL or HL. (at least it happened to that side versus the GPS ATTI side) any...

i was retarded and had the props flipped on the front, thanks guys!