Recent content by GerdS

Have you ever made own experiences with GoPro service? I have made with both and DJI service was significantly better...

No, forget about. The P3 is a closed system, especially designed for use with the camera module included. Better use a standard P2 or any other copter of similar or bigger size and conventional 5.8 GHz FPV equipment for this. Ideally you would add a second FPV camera as well as a video switch to...

Re: AW: Charger for a black pearl ? Yes, center pin is positive. Regards, Gerd

Re: AW: GoPro Powers Off Does it poweroff while recording or while running in standby? In first case you should try erasing the storage card by using the GoPro menu. Regards, Gerd

Are you sure there was no magnetic influence at the specific location you initialised the Phantom? Many pilots in case of compass error do the mistake and immediately calibrate the compass, although the compass was fine before at another location. If there is a locatrion-specific magnetic...

Have you also tried an advanced IMU calibration? Regards, Gerd

Yes it's safe. Just use the search function.

Sorry, that's impossible, line of sight is a Must, both for control uplink and video downlink. Change your position to ensure line of sight. Regards, Gerd

I had a similar problem with one of my batteries. Just remove the battery, try to switch it off with a single press to the button, re-insert it to the Phantom, power on and try to repeat the update. It worked in my case. Regards, Gerd

Just regard it from the efficiency side: The old motors are not that bad, so let's assume an efficiency of 90%, which means that 90% of electric energy will be converted into thrust and 10% into heat. If the new motors are much better let's assume an efficiency of 95%. That means that flight...

Had something similar 2 months ago, but not that critical. Regards, Gerd

Re: Phantom v2+ crashing into water I also have no further explanation about the reason for the auto-descending. But in case of Naza decides for auto-landing it should be possible to regain control by switching to Atti-mode and back. Regards, Gerd

Good morning, have you really slept for a full week and didn't find the time for looking into the forum prior to posting this thread? Regards, Gerd

Had two flights yesterday with my P2 running 3.08, H3-2D, GoPro 3+BE without any anormalities. Both batteries used have loader version 1.5, have been bought at February/March, have around 45 cycles and have been updated by Assistant 3.6 to firmware 2.6. Regards, Gerd

Have you tried the newest Assistant software 3.6 from today to fix it? New DJI prayer: Dear God DJI, please give us our daily Assistant update :D Regards, Gerd