Recent content by gazchap

  1. G

    Floods in Shrewsbury, UK - 26 Dec 2013

    http://www.youtube.com/watch?v=3KY99op2pfI Shot with my Phantom 2, GoPro 3 Black and ZenMuse.
  2. G

    Hello & questions!

    For music, I always use tracks from www.incompetech.com :)
  3. G

    FirstPersonView.co.uk FPV cable

    FirstPersonView.co.uk do a "plug and play" cable for connecting up to a Fat Shark transmitter - see here. Question I've got it, can that be used in conjunction with an iOSD-mini, or not? I guess you would connect the cable to the iOSD, and then run a separate cable from the iOSD to the Fat...
  4. G

    Futaba 8FG Super or Futaba 14SG for Phantom 2?

    Does the P2 have a Futaba compatible Rx on board, or do you need to mod one in like with the original Phantom?
  5. G

    [UK] AeroXCraft Gimbal for Phantom 1

    Do you have all the extra bits needed in your Phantom for the Zenmuse though?
  6. G

    [UK] AeroXCraft Gimbal for Phantom 1

    I've now upgraded to a Phantom 2 with a Zenmuse, so have no use for my AeroXCraft gimbal, my Phantom I is going to get "downgraded" to my "sport" multirotor. Barely been used, only around 15-20 flights, works perfectly. Comes with the mount needed to mount it to the Phantom, the four screws...
  7. G

    GoPro 3D?

    Has anyone tried to make 3D video using two GoPros strapped to their Phantom? If so, how did you mount them?
  8. G

    d3wey - Zenmuse Ready Custom FPV Undertray (Dual Battery)

    Re: d3wey - Zenmuse Ready Custom FPV Undertray (Dual Battery Nice one Dewey - did you have any joy with the AeroXCraft one in the end from the pics I sent you? :)
  9. G

    Flies ' Out Of The Box'

    Were you flying with the flashing LED facing towards you, or away from you? The flashing LED is on the BACK of the Phantom, so it should be facing towards you.
  10. G

    Phantom 2 - AeroXCraft gimbal?

    I'm toying with the idea of buying a Phantom 2 (not the Vision) to replace my Phantom 1, primarily due to the extra flight time available. I currently have an AeroXCraft gimbal on my Phantom - has anyone got one of these and confirmed compatibility with the Phantom 2? I assume that the battery...
  11. G

    Fiber Optic Cable

    I video in 1440p with my GoPro 3 Black, as even though it's not a widescreen format, I can crop it to a widescreen 1080p quite easily. To the OP - how have you attached the fiber to the LED? I saw someone else mod it by putting the cable inside the case and into the space the LED sits in, but...
  12. G

    Vision Props on a V1 Phantom.

    I've not been able to fly my quad for a few months due to darkness and generally being busy, but I'm getting back into it now. Since I've last flown, the Vision has come out and threads like this have popped up - so my question is, what is the state of compatibility between the Vision props...
  13. G

    Help!? Controlling Phantom after Fail-Safe return?

    I believe you have to flick from GPS mode to ATTI mode, so if you have failsafe on the third position of that switch, you need to flick to GPS mode, and then to ATTI mode. Make sure your throttle is 50%+ though or it will descend as soon as you regain control.
  14. G

    Alternativ camera

    You can set the GoPro 3 (and presumably some of the earlier ones) to use a "MEDIUM" field-of-view rather than a wide angle, although it will only allow this in certain resolutions.
  15. G

    Cut off in ioc

    IOC (Intelligent Orientation Control) is different to what you're talking about, which is an "Intelligent" cut-off mode - easy to get them confused, though. But yes, provided the NAZA in the Phantom is set to "Intelligent" cut off mode rather than "Immediate", it will not cut power to the...