Recent content by gaucho

May be something changed in Windows10. I used it on windows10. Did you try my tool? Can you see data flowing on the serial usb port? May be something related to usb

Did you solved it? When i will open it again I will let you know. For sure we will Find the new point to solder. Ground unit or air unit? I can Also do it for you at the same price of a repair mentioned in the first post.

Hi MCHammer, yes i can, I am in the euro zone. Write to me in private.

It works. Try to change browser or follow the instructions on the post by replacing https with http

Can u share the broken link, that you are tring to use?

Did you use reset pin as detailed in the procedure?

I don't know. How did you verified it is broken?

Link is working.

Thank you for sharing Alifranz. Where did you buy the chip?

You should start executing the procedure detailed on the first post and report here the result and the log obtained before, during and after the procedure.

In fact after unplugging and plugging back the connector on the camera side, the roll and yaw motors started to work again. Unfortunately another problem camed out. Now the yaw goes crazy left and right. “Yaw Motor overload” is the error on the app. The problem is due to a crash. In fact I...

I tried a reverse engineering but I stopped since pin are too much small and my cable was broken. Anyway, I stopped cause to repair such cable is too hard even using microscope. I ordered a new one, I mounted it yesterday, but now, even if I receive camera images, yaw and roll motors are not...

Dear LB_Victim compliments. Today I powered my air unit since long time and I found exactly the same problem as yours (and the same as Matt too). Then I read your post and I shorted the pin you found (let's call it RESET) to ground, with also BSEL pin too. Then I run the command on the terminal...

I STARTED A REVERSE ENGINEERING OF THE CONTROLLER PCB. DOES SOMEONE WANT TO HELP ME? EDIT1: I added some corrections in red color, to my first schematic. EDIT2: CW2015CSAD5U2 is a a fuel gauging system for lithium batteries. It reads voltage and it give output on a serial line. You will...