Recent content by funkdoobies

  1. funkdoobies

    Camera off center, 30 degrees to right

    If you push from an angle on the flat side of the shaft either top of the D or bottom you will be able to rotate the gimbal arm so the camera is as centred as you're ever going to get by eye. Mine was originally only slightly off centred but meant I couldn't actually fly straight and was really...
  2. funkdoobies

    Camera off center, 30 degrees to right

    Correct, I pushed the flat head in the gap of the D as you mentioned. I then undid the grub screw and pushed on the edge of the D of the shaft which then allowed me to spin the gimbal arm slightly. Once I thought it looked centred I locked the grub screw down again.
  3. funkdoobies

    . There's no science just wiggle it round and square it up then lock the grub scew in and turn...

    . There's no science just wiggle it round and square it up then lock the grub scew in and turn phantom on and hold over your head to see if the camera now sits centred. All makes sense when you look at the shaft and realise that this screw stops the shaft moving .
  4. funkdoobies

    Camera off center, 30 degrees to right

    Thanks for that. This sorted out my off centre camera. The grub screw tightens down onto a shaft, I held a flat head screw driver up the shaft and swiveled the camera to straighten up the camera. And jobs a good un! Turns out that they obviously have some play left and right.. Pic of the shaft...
  5. funkdoobies

    CAA updates drone guidelines

    CAA today updated drone guidelines for safe use in the UK. All common sense really and good to see nothing too restrictive has been added! Apart from the 500m line of sight which I never go over anyway . There's also an link to an animated guide on the site...
  6. funkdoobies

    Booster

    Ha ha ha ha... After a long day at work, thank you for the giggle
  7. funkdoobies

    HELP, Gimbal Overload, camera pointing to the right!

    Hi, I don't suppose you could post a picture of the where to find this offending screw? Thanks
  8. funkdoobies

    Phantom 3 rc HDMI output board now in store

    Can anybody confirm what the latency is on the hdmi output? will it be significantly better than the video and lag on the tablet? i've ordered the part but will be disappointed if the intermittent stutters I have on the Shield happen via HDMI on my goggles, I lose confidence flying FPV skimming...
  9. funkdoobies

    Mini-HowTo-DJI Phantom 3 HDMI Upgrade Board

    YAY! it's here.... http://www.phantompilots.com/threads/phantom-3-rc-hdmi-output-board-now-in-store.47858/ http://store.dji.com/product/phantom-3-hdmi-output-module
  10. funkdoobies

    Pilot app with 1-32 channels

    Version 1.0.7 can be found by reading this thread. I think this version will give 32 channels. http://www.inspirepilots.com/threads/anyone-have-older-dji-pilot-app-for-android-apk-install-file.4000/ Or direct link to download http://www.andywee.com/pictures/DJI-Pilot-1.0.7.apk
  11. funkdoobies

    P3 Firmware Pilot app beta version with all channels

    1.0.7 can be found on this thread http://www.inspirepilots.com/threads/anyone-have-older-dji-pilot-app-for-android-apk-install-file.4000/ Or this link http://www.andywee.com/pictures/DJI-Pilot-1.0.7.apk
  12. funkdoobies

    DIY Antenna Booster for Phantom 3

    Fantastic, thanks for sharing the designs. i'll be giving this a go!
  13. funkdoobies

    P3 camera pointing slighly to the right.

    thanks but when i do that it only adjusts horizon, i think the OP (as do i) has an issue where the actual camera points slightly to the right, if you're flying fpv you have to compensate as the quad isnt actually flying the same line the camera is pointing
  14. funkdoobies

    P3 camera pointing slighly to the right.

    happens on mine too. did an iMU calibration to sort the horizon tilt unfortunately it didn't fix the camera pointing to the right..