Recent content by FruStalin

  1. F

    How do I repair firmware upgrade failure???

    The latest news is that DJI now (as today) has a uploaded a new version of the Assistant software, VERSION 3.0 :D This version did the job and corrected the problem. Now everything is working. What is left now is to learn and understand the Ground Station and getting out there and putting it...
  2. F

    How do I repair firmware upgrade failure???

    Hello there I have a Phantom 2 and would like to use that with Datalink and Ground Station. As told I therefore upgraded the assistant software to version 2.00 and after that I upgraded the firmware for the Main Controller and the Central Board to its respective versions and now I have...
  3. F

    Groundstation_can get it to work/communicated

    BREAKING NEWS_Groundstation_can get it to work/communicated I found out that I needed to install Phantom 2 assistant software ver. 2.00 to get Things working. I upgraded the assistant software and after that I the upgraded the firmware for the Main Controller and the Central Board to its...
  4. F

    Groundstation_can get it to work/communicated

    Regarding the COM port selection in Groundstation, I do not have a choice. I can only choose the COM 3. If I make a chancement in "unit control" under the "controlpanel" then this will be effected in the Groundstation. Like chancing the COM 3 to COM 7 then I can only choose COM 7 in GS. Does...
  5. F

    Groundstation_can get it to work/communicated

    I have no problem connection the Phantom to the assistance software. But I cant connect the Datalink to its assistance software for upgrading firmware. The LEDs on the Ground End and Air End units lights up as I supposed it should. Solid green on the Link and blinking red and green for...
  6. F

    Groundstation_can get it to work/communicated

    I only have the COM 3 port to choose. I have no options! The dealer has told me that the COM 3 has nothing to do which USB port to select. The COM 3 has something to do with some protocol stuff. I have to chance something controlpanel/unit under Windows. But I dont know what I am looking...
  7. F

    Groundstation_can get it to work/communicated

    Hello there I just bought the DJI groundstation to use it with a PC I have installed the drivers and programs from the companion installation CD (except the .Net framework 3.5 and Explore 8 due to I allready have installed the Net frame 4.5.1 and Explore 11. I dont need the GPS exporter so I...
  8. F

    Terrible range with AVL58

    I went to the dealer with my complaine. He gave me new AVL 58 and a new screen which fixed the problem. Wheter it was a screen problem or a TX problem I will never know. But the problem is soleved. Now I have a range of 300 meters out and 50 meters. Should I expect more from the AVL58 videolink...
  9. F

    Terrible range with AVL58

    I believe that there is two recievers on the monitor. It is possible to choose Diversity mode in which the monitor by it self choose the reciever with the best signal. This is the recommended setting. It is also possible to choose which of the two recievers you would like to use. I have tried...
  10. F

    Terrible range with AVL58

    Hello PhantomPilots.com I am new to this forrum, but I am looking forward to participate. I have a question that some of you might be able to help me with. I have just bought a P2 with Zenmusen Gimabel mounted to use with my gopro 3 Black edition. I have also installed video link AVL58 to be...