Recent content by frogster

  1. F

    Firmware upgrade for H3-2D

    PS This problem still persists - I am sure that PH2 should have "Phantom 2" in the toggle box, and I can set only two positions for the gimbal using the gimbal slide lever - up (horizontal) or fully down. Connected? I suspect so. Ideas?? Very welcome. I have already tried recalibrating using the...
  2. F

    Firmware upgrade for H3-2D

    Many thanks to all those who have helped me trying to resolve my issue of aircraft not starting up on CFC which I suspected was due to a problem with the link between RC and aircraft. It was - but solving the issue with the PH2 assistant, recalibrating the RC, recalibrating the IMU and compass...
  3. F

    Problems following upgrade of assistant and firmware

    Hi bernardb - not at all. Judging by the led indications the stick midpoint error is too large, but I have calibrated and re-calibrated countless times to no avail. Any ideas?? Many thanks for your help.
  4. F

    Problems following upgrade of assistant and firmware

    Many thanks for your help PeteP - sadly it has not solved the problem. I have emailed the support guys at DJI and hope that they are working on a solution. I'll let you know.
  5. F

    Firmware upgrade for H3-2D

    PS - not sure if this is related to my previous post, but in the PH2 Assistant, on the titlebar running along the top I have "DJI PHANTOM 2" and the two toggle boxes toggle between "Phantom" and "Naza-M". Should "Phantom" read 'Phantom 2", and if so could it be that the PH2 Assistant is...
  6. F

    Firmware upgrade for H3-2D

    Still having enormous problems with my Phantom 2 following upgrade to firmware 2.0 - which I suspect is due to upgrading the aircraft firmware at the same time as upgrading the RC (and probably not helped by trying it on both Mac and the Windows version running on Parallels on the Mac). All I...
  7. F

    Problems following upgrade of assistant and firmware

    I became the proud owner of a DJI Phantom 2 with all the toys midway through this week (Zenmuse G3-2D, mini iOSD, FPV and Ground Station). Got all working OK with the exception of Ground Station (I didn't add the data link pending the app store OKing it for the iPad.... Now that it has been...