Recent content by fastmovn1

  1. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    I run my TS353 on channel 1 which is 5705, so I run my RX-LCD5802 on (checks chart) C-1, which is 5705. I don't even get signal on any other channel much less BETTER signal heh. so, which transmitter do you have (ImmersionRC600 right?) and which channel is it on? QYV, That was my post about...
  2. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    That's great, and a good feeling when you get that first real distance!! congrats..I myself can get 1600M before I lose my sight, It don't seem to matter what altitude I am at so long as I'm 100M at that distance. What was your altitude when you flew today?
  3. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    Hey QYV, have you ever tested if your diversity works well? the reason I ask is because of the test on mine I did, I put my helical on B and even selected it tuned to A1 and D7 for that matter and it had a bad signal..no distance at all. Aprx 300M. but I put it back on A and all is good. What...
  4. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    QYV, Thanks for posting the chart, I can say my curiosity has gotten the best of me now! I think when the weather warms a bit I'm gonna try to move the channel and see if I can go farther, its seems its my luck that the channel I pick just happens to be the lowest of the bunch..
  5. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    Newdayoutdoors, what is your altitude when you are 600m out, I found that the farther I go out I need to climb also to keep the signal strong. I was looking thru the chart for the bosscam and see that D1 is 5740 and that is the immersion channel 1 freq. I get a better signal a little off of my...
  6. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    0k well that helps, thanks for the info.. :D
  7. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    QYV,I was curious as to why the difference in output power from lower to higher channels so I emailed immersion customer support asking them if it was the case and why, here is their reply. " No I can not tell you that. There might be a slight difference between channels but 100mW would be...
  8. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    Hi all, well its a whole 14 deg. outside but the continued testing got the better of me, so off I went! If you were to look at the previous pics I posted you can see how close to the gimbal I have my receiver, when I got out to 1000meters It was after I moved it forward and also changed the...
  9. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    Good deal, let us know what you find, I'd like to go further myself however as I stated before I am in a subdivision with lots of wifi and RF noise so Idk if I can in here, im gonna take it to the beach this summer and see how far it will take me over water.. :o
  10. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    You are correct, sorry for the confusion, It is A1, I edited my other post. I'm curious as to what channel you are getting 900m with and what channel your transmitter is set to, Thanks
  11. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    I just found a super informative link!! check this out for fpv distance .. http://www.immersionrc.com/rf-range-demystified/
  12. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    The Bird has a five leaf and the transmitter has a 4 leaf, they are from fpvlr and that's the way they said to put them. I have a update, today I decided to move the FPV transmitter to the tail away from the gimbal, I did leave the 90 of the transmitter in place as seen in the pics. Ok so I...
  13. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    Ok guys, so I got the phantom out today and off I went in a different direction this this time same neighbor hood and same result! 600 +/-m grr.. I just don't know what I'm doing wrong, Its the same no matter where I place the ant. I did have the L fitting in just like the pic but I also had it...
  14. F

    FPV bosscam RX-LCD 5802 and emmersion compatibility

    FPVLR wrote: You need to install the antenna exiting out the side not the back of the copter. Tony. Tony, I had it to the side w/o the 90 and that was my 600m, I just installed the 90 and set it up this was before the pic, I will fly it like this and them report back..thanks