Recent content by dyarza

  1. D

    Phantom 2 Vision VS Phantom 2 and Accessories

    From my experience, You will be disappointed with the video quality of the Vision camera. Not the picture quality itself, but the lack of a gimbal stabilizing the camera. Once you have shot with a gimbal you will never be able to look at another video without it. Go for the P2 with all the...
  2. D

    Zenmuse on the Vision

    The Zenmuse works wight the Vision 2 right out of the box. There is a Zenmuse connector directly on the main board, and the base of the Vision has threaded inserts for screws that match the mounting pattern of the Zenmuse mount. Now for the bad news, you will get nicely stabilized video but no...
  3. D

    Gimbal on the Vision?

    indeed!
  4. D

    Tilt control: upgrade needed in Phantom?

    The Phantom 2 should have the option to tilt. On the Vision, it is disabled in software, with the X1 channel not available in the Assistant Software. As for the board, there should be no need to upgrade and will have a Zenmuse port directly on it.
  5. D

    Zenmuse H2 3D on Phantom Vision

    So, while I work on getting the tilt to work, with vislaw's suggestions, or by other means, here is a little more detail on what I have done. Installing the Zenmuse was very straight forward and I just plugged into the Zenmuse port in the Vision's board. I bypassed the PMU and GCU all together...
  6. D

    Zenmuse H2 3D on Phantom Vision

    Thanks vislaw, I'm not sure why you can't PM, I'm new to the forum myself and yours was the first I tried. Weird. Anyway, thanks for the explanation. If you have any further details, I know many other people have been trying to do this with no luck, so posting here would be most welcome...
  7. D

    Pairing a Naza-M v2 to Assistant Software

    Bumping in hopes someone knows about this. Thanks,
  8. D

    Zenmuse H2 3D on Phantom Vision

    Were you able to get the tilt control working? Thanks, D
  9. D

    Pairing a Naza-M v2 to Assistant Software

    Does anybody know how to obtain the 32 digit serial number that Naza-M Assistant software needs to pair to the controller? I have a Phantom 2 Vision and have replaced the built in camera with a Zenmuse H3-2D and a GoPro. It works just fine, but I have no tilt control, which is usually done via...
  10. D

    Gimbal on the Vision?

    Not really any info, but I installed a Zenmuse on a P2V and all it took is the 8-pin cable to the port labeled Zenmuse. It works just fine, but of course, I lost the FPV and I can't control the tilt because the Vision Assistant software does not show the X1 function at all, so I can't use...
  11. D

    Gimbal on the Vision?

    The Dutch gimbal does look great. In the meantime. Tonight I upgraded my P2V with a Zenmuse H3-2D. Taking the P2V camera off was straight forward. The cable coming from the bottom of the P2V is for the tilt servo, and it comes off easily. The Zenmuse uses a different mounting plate so you...