Recent content by DroneDream

Thanks for the reply! "As for the receiving end, I used to receiver antenna that came with the AVL58 and an FPV patch antenna." the Flysight RC801 comes with two antennae and allows diversity mode. I would have thought you wouldn't use the RX antenna for the avl58?

Can anyone tell me if they've had issues with having very low range (<100m) with this setup. I am on Band E, Channel 8, using diversity mode. What are things I should try to fix the issue? Or is it likely to be faulty product and I should return? any thoughts appreciated.

Re: Best practice for attaching air-end of datalink to P2(nv thanks all. I've gone with velcro too.

I have received the DJI datalink (LK24-BT), but I don't intend on flying with waypoints much of the time. I also have the DJI FPV hub/iOSD mini/AVL58 plus a GPS tracker and thus want to save on weight when I can. a) Can anyone share a photo of how they've attached their air-end of the datalink...

Thank billholl - it has solved the issue!

I also have this range of motion issue with the gimbal. I can point the camera directly forward but when I move the lever on the back it can only get to about 30 degrees, not pointing straight down. Any help appreciated.

Thanks davemcm.

As a relative newbie, I was curious about if and how one can use yaw adjustments to frame shots during automated flight. This would be useful when you have a 2-axis gimbal (as opposed to 3) for (relatively) short distance flights where the controller radio and video monitor is in range but...

The prospect of automated flight for P2 is exciting indeed! As a relative newbie, I may be behind on my knowledge of waypoint flying, so please bear with me. Does anyone know if you can manually adjust the yaw during an automated flight? i.e. after you upload the flightplan and sent the P2...