Recent content by Dom

  1. D

    After almost a year without problems.....

    I recently went through the same thing after an update. The only fix was to delete the DJI apps from the pad & computer both. Then I went to the DJI web sight and downloaded everything again and everything worked as it should. I hope this helps.
  2. D

    Battery communication error?

    It means that the battery did not securely lock into place and had the potential to slide out during flight. Just make sure you push it forward firmly until it locks into place.
  3. D

    No satellites, no camera pitch (post-crash trauma) - SOLVED

    Re: No satellites, no camera pitch (post-crash trauma) - SOL Sorry just trying to help, it was a similar problem that I had personally encountered. The important thing is that you got it fixed and your up and flying again.
  4. D

    No satellites, no camera pitch (post-crash trauma) - SOLVED

    Re: No satellites, no camera pitch (post-crash trauma) I FORGOT THIS EARLIER AND ITS AN ADDITIONAL STEP TO THE INFO ABOVE THAT MUST ALSO BE COMPLETED. One other thing, after downloading the firmware you must also connect to the internet, have a solid phantom connection and then through the DJI...
  5. D

    In mid flight, video stops recording.

    Card I probably junk. Also don't use anything other than an authentic class 10 card. (NO (ebay) knockoffs from drop shippers. Also don't use any cards over 32GB.
  6. D

    No satellites, no camera pitch (post-crash trauma) - SOLVED

    Re: No satellites, no camera pitch (post-crash trauma) Connect the Phantom to your computer's DJI Assistant software and then do a complete reload of the latest firmware. Even if it says you already have the latest firm ware click on DOWNLOAD. You will be surprised that even though it says...
  7. D

    Got my DJI Fatom 2 Vision ) upgrades?

    Go to FPVLR.COM and Talk to Tony. He will guide you in the right direction. He has excellent ideas, products, and his customer service is 2nd to NONE. DOM
  8. D

    troubleshooting Stage 2 FPVLR install

    I recently installed the stage 2 FPVLR on my new phantom vision 2+ and the same thing happened. What I found out after many hours of trial and error is that for some reason the un-connecting and reconnecting of the new antenna's gave the (phantom) some error codes. This caused me to get ZERO...
  9. D

    troubleshooting Stage 2 FPVLR install

    I recently installed a stage 2 FPVLR kit on my phantom vision 2+. I followed the instructions to a T and all appeared to have gone well until I turned everything on. Prior to the installation I would get 6-8 satellite's (but still have signal and video loss), now when I turn everything on I get...
  10. D

    Rapid multi battery charger

    I believe the rapid charger you have purchased is a parallel board charge which will NOT charge all three batteries at the same time. It will however, let you attach all three batteries to the board and them charge each of them at the normal charging rate. At least you don't have to keep...