Recent content by DMcNamara

To reply to your post doubting whether the P3 will fit in the HPRC2710PHA4 case, the drone fits fine and the battery's fit just need a piece of 1/2 inch of closed cell foam to take up the difference in battery thinkness, this is not a guess I just did a fit check of the P3 and it's battery's...

Any suggestions from you experts, I resently had a small crash from eight feet onto asfault and the gimble sepprated into two pieces, and broke the landing gear and one propeller. Ordered a new DJI (OEM) ribbon cable and replaced it, the ribbon cable from the camera gimble board that was...

Hope everybody had a wonderful Cyber Monday, my friend bought a P3P from Best Buy's for $799. I have been a phantom pilot for about a year and a half. I unboxed the phantom 3p and got all the necessary updates and everything was fine, I went to update the aircraft ,downloaded the bin file and...

By the way I forgot to say I have the old style 2312 motors, and I replaced the central board #33, going to grab a spare 2312 motor and get back to flying, thanks again my fellow Phantom Pilots.

I did not have these issues before the freeze up on Motor #4. So from what you guys are saying is return to the stock and see that if everything returns to normal, I have the three stock motor that are ok I just need to replace the one with the frozen bearings and hope for the best, thanks for...

I had one of the stock P3 motor freeze up (luck it was on lift off and not in the air, so I looked in to these and they are only a few dollars more then a stock set of DJI motors, the bells on these are balanced from the factory and the same KV rating as the stock ones, they are made for the...

Just replaced all four P3P motors with Tiger Navigator Series (White Version) V.3.0, installed as per T-Motor instructions packed with New Motors. After install the go pilot app is reporting obstructed motor error, from random motor on each attempt to start, after three to four tries, all motors...

Phantom 3 Pro Pilot About two years, electronics background in the space industry !