Recent content by Colombus

Bigbad. I have those props on process to be delivered by Helipal. Are you satisfied, are they OK in terms of balance?

The problem here is that I am not sure that I do not need it :? Not knowing the french regulation. I have FPV and have a Zenmuse with GP3. I've been reading a lot and apparently if the craft has a camera (even an small GP3) seems that it is required some kind of license. I am...

There have been very worrying news coming from France: http://www.thelocal.fr/20140220/legionn ... ffel-tower News are starting to spread and I am afraid that general public start to panic and become paranoic, for instance today I took my phantom to the usual beach where I go very often. Very...

Re: VTX and Velcro question. This is what I've done. It works perfect, specially needed if you have a gimbal. This was The only setup that worked well for me from all angles

Here it is.

I've finally found the best solution that worked for me. Now my VTX is on one of my back legs (the one that is not hosting the compass) horizontally secured with two zip ties and the spironet antenna is sticking out horizontally as well . I know it is not very neat but it works perfectly. I...

F2V : Do you have a Phantom 2 visio? If this is the case I do not thing you can use Fatshark goggles with it, unless someone has been be able to find a hack that I am not aware of. Independent of that I would go for the Fatshark Attitude, which are the one that allow to fix the IPD, which is...

This part of the assistant is is for a third party gimbal. You can leave the setting "off" and Zenmuse will work normally.

Thanks OI for your feedback. I am aware of the sensitivity of 5.8 Ghz of loosing LOS. Is there any "optimal" way of installing the antenna to minimize the interference. M

I've recently installed a Zenmuse on my Phantom and the gimbal itself works quite well. I am using the video out of the gimbal itself to feed the VTX (immersion 600MW). I had to change the place where my VTX was before and now I had to place it as it is showed on the picture. Today doing...

Thanks Coues for your feedback. Glad to know that I am not the only one that is noticing the overheating. What about my point 3, is something that has ever hapenned to you?

I just installed my brand new Zenmuse on a Phantom V1.1. I haven't be able to test it on a real flight yet, but I've been doing some test on my desk and I would appreciate some feedback on few points. 1. GP is getting really hot together with the Zenmuse plate. Is it normal? 2. A couple of...

I just installed my brand new Zenmuse on a Phantom V1.1. I haven't be able to test it on a real flight yet, but I've been doing some test on my desk and I would appreciate some feedback on few points. 1. GP is getting really hot together with the Zenmuse plate. Is it normal? 2. A couple of...

I managed to find the issue. It was just a matter of doing a X1 calibration and then i managed to assign the right control to Aux1 Channel. Now I have the gimbal tilt control being on my left trim. Works great!! Thank you for the inputs

Sorry, I did't include the TX since is is not very well known and I though this could be more related to a specific config on the Naza assistant but you are right. I am using a Walkera Devo8s. It is a full range, 8 channels TX with a color touch screen GUI. Not many people using walkera TX...