Recent content by charliesoh

  1. C

    Camera shifts after IMU calibration

    Thanks for forum-ish tips well I hope that all is well when I have the opportunity to take it to the air this week end cos read threads about some experiencing yaw drifting after IMU calibration. Nvr know that IMU calibration is so sensitive. I carried it out as experiencing that whilst flying...
  2. C

    Camera shifts after IMU calibration

    Thanks the immediate response by the way please elaborate on what does FAIK and YMMV means. Did you finally find a solution to resolve and stablise the camera at all. It is kind of distrubing especially when this does not happen before the IMU re calibration.
  3. C

    Camera shifts after IMU calibration

    After successful calibration of IMU it is noticed that the camera tends to shift about 5 degrees to the left momentarily when I start up the P3P by pulling back both throttle sticks in the usual manner after which it returns to the original state of facing the front again. At same time also...
  4. C

    Litchi Beta Testing

    Yes I see what you have achieved and that should be good enough as there is nothing of interest in the sky in any case. The shot you did appears to be acceptable to a certain extent.
  5. C

    Litchi Beta Testing

    Certainly I realised that +30 equals to seeing prop and arms as well as had tested it once before. Alright I now begin to understand the camera limitation with the P3P and would seem impossible to obtain a full 360x360 pano at all. Thanks for the tips
  6. C

    Litchi Beta Testing

    I tested out on the pano feature of Litchi V2.5.1 and had no trouble with the default setting whilst using the horizontal, spherical 2 and 3 rows function and managed to obtain fairly good pano view after stitching the images. However the above setting will not be able to cover the entire sky...