Sorting through some of my extra drone gear and accessories today, and found a brand new Stage 2 antenna upgrade kit for the Phantom 2 Vision or Vision+.
STAGE 2 KIT - Pilot's side
This is a controller side antenna upgrade kit to improve both control range and also video transmission range...
Sorry for not responding sooner. I started this thread but have upgraded my P2V to an Inspire 1, and do not frequent the Phantom Pilots forum as often anymore.
It would be cool to get together with some other London flyers.
Do you have any suggestions for nice areas to fly around London?
Would...
I have the original compass that came with the P2V. I have also considered trying an upgrade to the new "anti-static" compass. I believe some P2V users have successfully upgraded but others have reported that the compass cable is not long enough (original units had compass cable plug into GPS...
I am concerned that if the RPG can cause enough interference for the compass calibration to fail, could it also interfere with the compass during regular flight. I really wish the Rotorpixel would respond to my emails and give some type of assistance.
Does your compass calibrate properly if you unplug power to the Rotorpixel gimbal (prior to powering up the P2V). The flashing red lights indicate the compass calibration was not successful.
Is your Rotorpixel gimbal one of the early models with large motors, or the current design with smaller...
I sent an email to Keri at Rotorpixel asking if he could test one of the early model (large motor) gimbals with the 3.12 or 3.14 firmware version. So far no response, but I will report back here if I get a response.
I have not been flying too many times since this issue started. It has me worried that the Rotorpixel motors and causing interference to the compass.
Keri replied to one of my emails but indicated that others were not having the same issues.
I am starting to think that only the early model...
I am having exactly the same issue and have made several posts trying to determine if others were having similar issues. Note that this issue started since updating to firmware 3.12.
http://www.phantompilots.com/posts/333501/
I emailed Keri and explained that the only way to get a successful...
I have had compass calibration issues since updating to firmware v3.12.
The compass calibration fails to complete successfully unless I first unplug the Rotorpixel gimbal. It seems that the newest firmware is more sensitive and the RP gimbal is causing interference.
I have been having exactly the same issue with my P2V with Rotorpixel gimbal since upgrading to the version 3.12 firmware.
See my post at http://www.phantompilots.com/threads/rotorpixel-gimbal-technical-discussion.10814/page-17#post-333501
Is your Rotorpixel gimbal one of the early model ones...
Is anyone else having troubles getting a successful compass calibration after installing the latest 3.12 firmware. I am flying a P2V with Rotorpixel gimbal (early model).
I keep getting failed calibration with flashing red lights.
I started to wonder if the Rotorpixel gimbal was causing...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.