Recent content by BelgiqueBasterd

Retracting gear is installed, I'll let the pictures do the talking :-) As you can see not a great succes :-)! Kit is of really poor quality, especially the servos and the cam that connects the servos to the hinged leg. I suspect the cam jumped a teeth on the servo sprocket, when I...

Thanks for the info, ordered one of the chinese cheap systems last week. Don't expect much from it, time will tell :-).

I have the same situation with my graupner mx20 setup, with throttle in down position on the ground the motors turn off, while flying no problems. I have the kit on order to convert stick to return to centre, don't like the fact that when you are not paying attention to your heigth and leave the...

Hello, quick question about retractable landing gear, what would be my best option price/quality for retractable landing gear? I'm using a graupner transmitter with reciever on my phantom 2 gopro, so I have extra free channels available. On ebay there are some relatively cheap kits, but am...

It works! I reinstalled the original phantom rx and then tested to see what happens when I turn the original tx off. All inputs stay in their last position before I turn the tx off, only the U (S1 switch) channel input changes to 471 and activates the failsafe. I then dug into the manual of...

I have another question, in the assistant software what do the numbers next to the stick, u, x1 and x2 input stand for?

Thanks for the reply, I will reinstall the original phantom 2 receiver in the phantom and then see what happens in the DJI assistant software when I turn of the original transmitter. I'll then try to duplicate the action using the graupner transmitter. How long should it take after the...

Hello, I've setup my phantom 2 H4-3D for a Graupner mx20 transmitter. Everything works well, and phantom flies ok with all the functions working. However one thing is not working, the phantom does not go into failsafe mode when I turn the transmitter off. Failsafe works perfectly when...