Recent content by Bayarea650

Thanks guys. Got my new unit today and out the box, green lights flashed within 5 seconds :) Hovered smooth also! So don't forget, these units can be DOA! I've spent many hours trying to resolve this with no success, only to find out I had a bad unit.. ahhhh Oh well, back to flying :)

Yes I did, I even tried calibrating the switches many times afterwards in NAZA mode. The screen shows GPS on the bottom when the switch is on GPS. I took the unit outside, tried calibrating the GPS, kept flashing ONE green and THREE rapid reds. I let it sit outside for at least 15 minutes (I...

Also is there a reason why when switching to Nazam (advanced) mode on the SW enables one blinking green? I just switched back to normal mode (Phantom mode) on the SW and now it's back to flashing yellow only... Unless I am missing something?

So I went into the advanced mode of this SW, calibrated the sticks, S1 S2 switches and now I get one green flash and 3 red flashes right away. Also the unit no longer goes into compass calibration mode (switching from GPS to ATTI 6-10 times)... I need to move around Phantom to get the unit to...

Yes, I downloaded the DJI RC Assistant and have updated the firmware on the transmitter. Still no go, I've tried re-calibrating my transmitter (sticks and the switches)... Ughhh :evil:

Yes, it flies fine but cannot get it to hover (does not stay still, constantly moves), meaning no GPS? Even while in air, the lights are yellow. I took a few screen-shots of what I am seeing in the software, see attachment (GPS shows 0? Doesn't show any loader information for GPS and...

That's the first thing I do, when in calibration mode the lights are steady green, then goes back into flashing yellow afterwards.

It's always set to GPS mode before even powering on the controller. Can this unit be DOA? Unless I'm missing something...

It has the latest firmware (NAZA SW stays current version)..

Hi guys, I have both the DJI Phantom 1 (registers fine with GPS, all green) and just picked up the Phantom 2 no-vision. Out the box, I cannot get the P2 to register with any GPS signals, the unit constantly blinks yellow. I have not seen one green blink what-so-ever. My P1 registers right-away...