Recent content by arturcongo

the same cable works on my other phantom 3 pro . I have tried change the batteries accross from the other drohn e who works , but still no live view. Seems the issue is with the lightbrige ?

cant select the custom channel. i have tired to deinstall , reboot the iphone and install the app again ,, same issue. going to sleep now, its close to 1 am this site , will continue tomorrow..... thx so far for the help .

.

this could be an issue ?

I can View and sync the photos , but not the videos. I have tried already to downgrade the remote to version 1.5.80 ( this is the inly one who is available for downgrade . but after downgrade still same image transmission issue . The remote is version C1 ( written on the back of the remote ) ...

also i can record photos and videos over the remote .

I Am using a Iphone 6 plus , which is working fine with the second P3 pro that i have here . i have formated the card again in the drone and rebooted it. The log file is empty after reboot and also not bin file there. The drone is starting normal without any issues. Only NO live Image on...

and still no live feed

when i turn it on regularly without trick , i hear a sequence of 3 times 2 beeps , with color of led is flashing green, then the led is changing between red and green with 33 short beeps , before the continuous beep starts and the red led goes steady on . after the last trail i have the below...

I was using a micro sd adapter and used the sd card slot in the PC and Mac . I have followed now your suggestion . Result: without trick it start the upgrade process and after about 20 - 30 seconds it move to the continious beep. i stopped there. with the trick it starts the process and after...

one think to add here , the owner of the drone did an upgrade from unkknow version ( possibly delivery version ) to 1.9.6 he didnt followed the step by step upgrade procedure.

Hmm , looks like the process dont works , it delays the continuous beepp just for some more minutes and the update fails again . any other suggestion ?

wow , thanks for the tipp. I am able now to trigger the update again without the continius beeeeeep. will keep you updated once done....

[00014675]========== 2016.10.14 00:18:48. boot(15) ============ [00014714]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9]. [00014756]Packet upgrade start... [00014798]Packet checking... [00014841]Packet vlink 01.03.0020 <-> 01.01.0009. [00014910]Done. [00014950]Version...

[00014875]Version checking[1]... [00014965][03 05][00] v34.2.0.9 -> v34.2.0.9 [00015039][03 06][00] v2.4.20.18 -> v2.4.20.18 [00015079][04 00][00] v1.44.0.0 -> v1.44.0.0 [00015222][11 00][00] v1.8.0.0 -> v1.8.0.0 [00015344][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support...