Recent content by 4me2

Hi.... I am a step further. I have flown outside (in D-Bus mode) I do have to calibrate the Compass before each flight :? After that it flies just like an old type of helicopter without heading lock etc. GPS does not work, when I put the Phantom in a drift, it keeps drifting (where it should...

Unfortunately nobody is helping.... I have just flown outside and GPS does not seem functional AT ALL Also I need to "calibrate the compass" each time before flight. The light is flashing red and yellow until I flip the switch 5x (not 10 like in the manual) and go into Compass calibration mode...

Actually it's constantly flashing and keeps doing that until I detach the battery There is no "warm up IMU" there is an init sequence and after that just Yellow Flashing Indeed That is exactly what I thought but..... mine flies only in D-bus mode so... there is something wrong Apart from...

I have just tried with D-Bus mode and the Phantom works. I have only tried it inside and I need to calibrate the compass each time I am starting up, but when selecting D-bus and not PPM, the Phantom flies. There are a few strange things though: - The switch is set to ATTI and the other to OFF...

Hi, after upgrading the Firmware the PPM mode does no longer work Whenever I switch to D-Bus, I can see the control, as soon as I go back to PPM, there seems to be no communication between the transmitter and the Phantom. This is confirmed in both the software and when starting up the Phantom...

Hi, Just bought the Phantom. Did the firmware upgrade and as said, downloaded the Default Configuration parameters and installed those. After a power cycle, when NOT connected to USB, the Phantom flashes yellow led fast. This should indicate: "no transmitter" checked the connection (with the...