Recent content by 3LEGGEDSQUIRREL

Haven't seen that episode yet flyNfrank. Im in East Texas, where was that particular episode filmed?

The S900 sounds like a plan for me too! Maybe if someone has one for trade, i could upgrade. I have many cooooool things to trade, from things that make noise to things that are silent.

Something else, I had this Thermal camera from another project not involving a drone and I just decided to put it on one. Those who are concerned about weight issues when ordering a camera should look along the lines of something like the FLIR Tau 2 336 on ebay. This just has a 30hz refresh...

Hey guys. [email protected] is my email. Im sorry Im not seeing these responses until everyone is late and gone. Feel free to email me. I do have the 320 version of the LITEYE. Something else, a couple of times my phantom has been stubborn on lift regardless of the gain setting percentages...

Also, if you have a MAC and an iPhone ....you can use the Quickview Player app to record your iPhones screen during flight

I did the same thing to the camera power wires as far as removing them from the plugs. I have 2 vision plus phantoms and 3 cameras and gimbals I use as well so it will be pretty easy to change back after HOG season. Im happy with the mini thermal. Its made to go onto a soldiers helmet wired to...

I removed the wire from the actual pin itself and soldered my video wire to it. Im glad you understood my directions.

Sorry it took so long to reply back. In order to do this you need to leave your top gimble board attached. With all three plugs attached. There is a 4 pin plug, an 8 pin with 6 wires, and a 6 pin plug with 6 wires. The last one is what you want. (6 pin/6plug). The far right wire on the far right...

i think you need a separate radio and controller with this set.

Im sure by now you have found your solution for your FLIR camera question, but if not...I have one on one of my phantoms that feeds all data to my iPhone through the app and all you have to do is splice into 1 wire to make this possible. Im using the LITEYE Aquila mini thermal though. Let me...

Some different paint schemes on my two vision +